Metal roofing
Architectural shingles
Tile roofing
GAF
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Shingle Repair: The Thousand Oaks Owner’s Guide
Boral shingle repair in Thousand Oaks typically runs $425 – $850 installed for a small repair of 10 – 20 shingles, and we stock Boral-compatible materials on our trucks so most jobs are done in a single visit. Most Thousand Oaks homeowners discover a failed Boral shingle the same way: a dark stain appears on the ceiling after the first real rain of the season, or they spot a shingle in the yard after a Santa Ana wind event. By the time you notice it, water has usually been working its way under the shingle for weeks, quietly soaking the underlayment and, in the worst cases, the decking below.
Boral shingles are concrete and stone-coated steel composite products, not asphalt. That matters because the failure modes and repair methods are different, and a roofer who treats them like standard asphalt shingles will create more problems than they fix. We see this constantly in neighborhoods like Lang Ranch and Newbury Park, where Boral tile profiles are common and the summer heat cycling off the hills puts real stress on the fasteners.
Key Takeaways:
- Boral shingle repair in Thousand Oaks typically costs $425 – $850 installed for small repairs
- Most Boral repairs we complete same-day from truck stock
- Boral shingles fail differently than asphalt: fasteners, not the shingle body, are the usual culprit
- Every repair includes our 365-Day Done Right Promise in writing
Which Boral Models This Applies To
Boral makes two distinct roofing product lines that Thousand Oaks homeowners call “shingles,” and they are not interchangeable. The first is the Boral concrete tile line, sold under profiles like CedarLite, VillaTile, and Flat Shake. These are individual concrete tiles, roughly 13×16 inches, that interlock and are usually nailed or screwed through pre-drilled holes. The second is Boral Steel stone-coated shingle panels, sold under the Boral Steel brand, which come in larger panels, typically 48×15 inches, with a stone-chip coating pressed into the steel. If you have Boral Steel, you don’t have individual shingles to replace; you have a panel system where one damaged panel usually means a section replacement.
Here’s the compatibility gotcha that catches Thousand Oaks homeowners off guard: concrete tile profiles from different years often don’t interlock cleanly, even within the same brand. A CedarLite tile made in 2012 may have a slightly different nose profile or interlock geometry than the same profile made in 2022. We match by taking the old tile off the roof, checking the mold marks on the back, and measuring the interlock before ordering. Boral discontinued direct-to-homeowner sales years ago, so most replacement tile comes through roofing supply channels where we verify year-to-year profile matches.
On the OEM versus aftermarket question: for Boral concrete tile, we usually source the actual Boral tile or a direct mold-compatible equivalent from suppliers we’ve vetted over two decades. For Boral Steel panels, we use genuine Boral Steel where it’s available; when it isn’t, we’ll tell you plainly and discuss alternative stone-coated steel panels rather than installing something that looks close but weathers differently.
Mercer Roofing Co Thousand Oaks is an independent roofing contractor and is not affiliated with Boral. We install and repair Boral products alongside other manufacturer-recognized brands including GAF, Owens Corning, and CertainTeed.
Styles & brands we work with





Signs Your Boral Shingle Repair Is Failing
- Displaced or shifted tile after wind. The Santa Anas that blow through Thousand Oaks in the fall can lift the nose of a concrete tile that was originally nailed too high or with the wrong fastener. When the tile shifts, the interlock breaks, water gets under the course, and the tile below starts absorbing runoff it wasn’t designed to handle.
- Dark ceiling stains or drips after rain. This is the classic Thousand Oaks discovery when the first winter storm arrives. By the time the stain shows, the underlayment beneath the Boral tile has already been compromised, and the plywood decking may be starting to soften.
- Cracked or spalled tile surface. Concrete tile can develop hairline cracks from thermal stress, especially on south-facing slopes in Thousand Oaks where the summer sun beats on the tile and the overnight temperature drop creates constant expansion and contraction. A cracked tile channels water straight to the underlayment.
- Rust streaks on Boral Steel panels. Stone-coated steel panels fail at the cut edges and around fastener penetrations first. The stone chips stay intact, but rust bleeding from a cut edge or a raised screw head means the steel substrate is corroding underneath.
- Granule or stone-chip accumulation in gutters. If you’re cleaning stone chips out of your Thousand Oaks gutters, that’s the coating on your Boral Steel panels eroding, usually due to a previous patch job or impact damage. The steel below is now exposed to coastal air and will begin oxidizing.
Replacement Cost & What’s Included
In Thousand Oaks, a typical Boral shingle repair runs $425 – $850 for 10 – 20 cracked, shifted, or broken tiles, including parts, labor, and a written guarantee. A smaller targeted fix, like three or four tiles, usually lands between $275 and $475. Boral Steel panel section replacement runs higher, typically $950 – $1,800 depending on panel count and whether we need to re-flash the penetration points.
What drives the price: the tile profile (some Boral profiles have limited availability and cost more per tile), roof pitch and access, whether we’re replacing underlayment beneath the failed tiles, and whether fasteners on surrounding tiles need re-nailing. Thousand Oaks single-story ranchers with a walkable 4/12 pitch are on the lower end. A steep two-story in the hills of North Ranch or a tile roof over a second-story deck means more setup and safety equipment, which shows up in the estimate.
Every Boral repair we do includes a written line-item price before any work starts, a written 365-Day Done Right Promise, and a free second visit if the repair fails within that year. We don’t do verbal estimates, and we don’t do change orders. When Grant Whitlock’s crew quotes you $625, the invoice says $625.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do the investigation yourself. Grab a pair of binoculars and look for shifted tiles, cracked surfaces, or missing sections from the ground. Check the gutters for stone chips. Look at the ceiling after a rain. You can even photograph what you see, and when you call us, a live person answers 24/7 and can talk through what you’re seeing before we schedule anything.
Where DIY goes wrong with Boral: walking a concrete tile roof without knowing where to step. Concrete tile cracks under concentrated weight, and a homeowner who steps between the battens instead of on them can turn a two-tile repair into a forty-tile repair in about nine seconds. Additionally, working at height on any roof carries real risk, and Boral tile is deceptively slippery when dry and treacherous when damp. When we repair Boral in Thousand Oaks, our technicians use cougar paw pads and walk only on the lower third of each tile, and we inspect the underlayment below every repair point before closing it up. That’s not something you can see from the top.
A roof should protect you quietly; if you’re thinking about it, something’s wrong. If your Boral shingles are failing, call (805) 309-3314 and we’ll send you a technician’s name and photo before they arrive, badge in at the door, and put everything in writing before a single tile comes off.
FAQs
Boral concrete tile can last 50+ years in the Thousand Oaks climate, but the fasteners and underlayment beneath it typically need attention at 20 – 30 years. Concrete tile itself is remarkably durable here; what fails first in Ventura County is usually the nail or screw holding the tile, not the tile body. The underlayment is the hidden variable, and it wears out long before the tile does. If your Boral roof is past year 20 and you’re seeing shifting or leaking, call (805) 309-3314 and we’ll inspect what’s happening under the surface.
A hairline crack in a Boral concrete tile cannot be reliably repaired; the tile needs replacement because water will find the crack every single time. Some contractors will caulk or seal a cracked tile, but thermal cycling in Thousand Oaks reopens the crack within a season or two. The honest fix is a tile replacement with a profile-matched Boral tile, which is usually less expensive than you’d expect. Call (805) 309-3314 for an exact quote after we see the tile.
Most Boral concrete tile repairs in Thousand Oaks are finished in 2 – 4 hours on site, with the entire visit including setup, repair, and cleanup completed the same day. Boral Steel panel section replacements run longer, usually a half day to a full day depending on how many panels and whether flashing needs to be redone. We’ll give you a time window when we schedule, and the price doesn’t change mid-job. Call (805) 309-3314 for a free estimate.
We stock common Boral concrete tile profiles and Boral Steel panels on our Thousand Oaks trucks, which means most repairs are completed in a single visit without waiting on a supplier order. For less common profiles or older mold years, we source the match the same week through our supply partners and schedule once we’ve verified the interlock geometry. When you call (805) 309-3314, we’ll tell you honestly whether we have your profile on hand or need to order it.
Get a Written Estimate for Boral Shingle Repair in Thousand Oaks
If your Boral shingles are shifting, cracking, or letting water in, don’t wait through the next rain. Call Mercer Roofing Co Thousand Oaks at (805) 309-3314 and a live person answers, day or night. You’ll get a written price before any work starts, a technician whose name and photo are sent to you before they arrive, and a 365-day written guarantee on the repair. That’s how we’ve done it since 2000, and that’s the Threshold Standard on every visit.
Written by Grant Whitlock, Owner, Mercer Roofing Co Thousand Oaks at Mercer Roofing Co Thousand Oaks, serving Thousand Oaks and nearby areas.