A Mercer company - serving Thousand Oaks, CA

Boral Shingle Repair Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Boral Shingle Repair: The Thousand Oaks Owner’s Guide

Boral shingle repair in Thousand Oaks typically runs $425 – $850 installed for a small repair of 10 – 20 shingles, and we stock Boral-compatible materials on our trucks so most jobs are done in a single visit. Most Thousand Oaks homeowners discover a failed Boral shingle the same way: a dark stain appears on the ceiling after the first real rain of the season, or they spot a shingle in the yard after a Santa Ana wind event. By the time you notice it, water has usually been working its way under the shingle for weeks, quietly soaking the underlayment and, in the worst cases, the decking below.

Call (805) 309-3314

Boral shingles are concrete and stone-coated steel composite products, not asphalt. That matters because the failure modes and repair methods are different, and a roofer who treats them like standard asphalt shingles will create more problems than they fix. We see this constantly in neighborhoods like Lang Ranch and Newbury Park, where Boral tile profiles are common and the summer heat cycling off the hills puts real stress on the fasteners.

Key Takeaways:

  • Boral shingle repair in Thousand Oaks typically costs $425 – $850 installed for small repairs
  • Most Boral repairs we complete same-day from truck stock
  • Boral shingles fail differently than asphalt: fasteners, not the shingle body, are the usual culprit
  • Every repair includes our 365-Day Done Right Promise in writing

Which Boral Models This Applies To

Boral makes two distinct roofing product lines that Thousand Oaks homeowners call “shingles,” and they are not interchangeable. The first is the Boral concrete tile line, sold under profiles like CedarLite, VillaTile, and Flat Shake. These are individual concrete tiles, roughly 13×16 inches, that interlock and are usually nailed or screwed through pre-drilled holes. The second is Boral Steel stone-coated shingle panels, sold under the Boral Steel brand, which come in larger panels, typically 48×15 inches, with a stone-chip coating pressed into the steel. If you have Boral Steel, you don’t have individual shingles to replace; you have a panel system where one damaged panel usually means a section replacement.

Here’s the compatibility gotcha that catches Thousand Oaks homeowners off guard: concrete tile profiles from different years often don’t interlock cleanly, even within the same brand. A CedarLite tile made in 2012 may have a slightly different nose profile or interlock geometry than the same profile made in 2022. We match by taking the old tile off the roof, checking the mold marks on the back, and measuring the interlock before ordering. Boral discontinued direct-to-homeowner sales years ago, so most replacement tile comes through roofing supply channels where we verify year-to-year profile matches.

On the OEM versus aftermarket question: for Boral concrete tile, we usually source the actual Boral tile or a direct mold-compatible equivalent from suppliers we’ve vetted over two decades. For Boral Steel panels, we use genuine Boral Steel where it’s available; when it isn’t, we’ll tell you plainly and discuss alternative stone-coated steel panels rather than installing something that looks close but weathers differently.

Mercer Roofing Co Thousand Oaks is an independent roofing contractor and is not affiliated with Boral. We install and repair Boral products alongside other manufacturer-recognized brands including GAF, Owens Corning, and CertainTeed.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Flat & low-slope
Flat & low-slope

Signs Your Boral Shingle Repair Is Failing

  • Displaced or shifted tile after wind. The Santa Anas that blow through Thousand Oaks in the fall can lift the nose of a concrete tile that was originally nailed too high or with the wrong fastener. When the tile shifts, the interlock breaks, water gets under the course, and the tile below starts absorbing runoff it wasn’t designed to handle.
  • Dark ceiling stains or drips after rain. This is the classic Thousand Oaks discovery when the first winter storm arrives. By the time the stain shows, the underlayment beneath the Boral tile has already been compromised, and the plywood decking may be starting to soften.
  • Cracked or spalled tile surface. Concrete tile can develop hairline cracks from thermal stress, especially on south-facing slopes in Thousand Oaks where the summer sun beats on the tile and the overnight temperature drop creates constant expansion and contraction. A cracked tile channels water straight to the underlayment.
  • Rust streaks on Boral Steel panels. Stone-coated steel panels fail at the cut edges and around fastener penetrations first. The stone chips stay intact, but rust bleeding from a cut edge or a raised screw head means the steel substrate is corroding underneath.
  • Granule or stone-chip accumulation in gutters. If you’re cleaning stone chips out of your Thousand Oaks gutters, that’s the coating on your Boral Steel panels eroding, usually due to a previous patch job or impact damage. The steel below is now exposed to coastal air and will begin oxidizing.

Replacement Cost & What’s Included

In Thousand Oaks, a typical Boral shingle repair runs $425 – $850 for 10 – 20 cracked, shifted, or broken tiles, including parts, labor, and a written guarantee. A smaller targeted fix, like three or four tiles, usually lands between $275 and $475. Boral Steel panel section replacement runs higher, typically $950 – $1,800 depending on panel count and whether we need to re-flash the penetration points.

What drives the price: the tile profile (some Boral profiles have limited availability and cost more per tile), roof pitch and access, whether we’re replacing underlayment beneath the failed tiles, and whether fasteners on surrounding tiles need re-nailing. Thousand Oaks single-story ranchers with a walkable 4/12 pitch are on the lower end. A steep two-story in the hills of North Ranch or a tile roof over a second-story deck means more setup and safety equipment, which shows up in the estimate.

Every Boral repair we do includes a written line-item price before any work starts, a written 365-Day Done Right Promise, and a free second visit if the repair fails within that year. We don’t do verbal estimates, and we don’t do change orders. When Grant Whitlock’s crew quotes you $625, the invoice says $625.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely do the investigation yourself. Grab a pair of binoculars and look for shifted tiles, cracked surfaces, or missing sections from the ground. Check the gutters for stone chips. Look at the ceiling after a rain. You can even photograph what you see, and when you call us, a live person answers 24/7 and can talk through what you’re seeing before we schedule anything.

Where DIY goes wrong with Boral: walking a concrete tile roof without knowing where to step. Concrete tile cracks under concentrated weight, and a homeowner who steps between the battens instead of on them can turn a two-tile repair into a forty-tile repair in about nine seconds. Additionally, working at height on any roof carries real risk, and Boral tile is deceptively slippery when dry and treacherous when damp. When we repair Boral in Thousand Oaks, our technicians use cougar paw pads and walk only on the lower third of each tile, and we inspect the underlayment below every repair point before closing it up. That’s not something you can see from the top.

A roof should protect you quietly; if you’re thinking about it, something’s wrong. If your Boral shingles are failing, call (805) 309-3314 and we’ll send you a technician’s name and photo before they arrive, badge in at the door, and put everything in writing before a single tile comes off.

FAQs

Get a Written Estimate for Boral Shingle Repair in Thousand Oaks

If your Boral shingles are shifting, cracking, or letting water in, don’t wait through the next rain. Call Mercer Roofing Co Thousand Oaks at (805) 309-3314 and a live person answers, day or night. You’ll get a written price before any work starts, a technician whose name and photo are sent to you before they arrive, and a 365-day written guarantee on the repair. That’s how we’ve done it since 2000, and that’s the Threshold Standard on every visit.

Written by Grant Whitlock, Owner, Mercer Roofing Co Thousand Oaks at Mercer Roofing Co Thousand Oaks, serving Thousand Oaks and nearby areas.

Need Roofing help in Thousand Oaks? Licensed & insured · Written quotes before work starts response · free estimates
Call (805) 309-3314
Local Service Coverage

Request a Free Estimate in Thousand Oaks

Tell us what you need - Mercer Roofing Co Thousand Oaks responds fast. No obligation.

By submitting this form, you acknowledge our Privacy Policy and agree that you may be contacted by call, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch